We Do ! Conversion Retrofitting of all Testing Machines
HomeContact Us  
Mechatronic Control SystemsMechatronic Control Systems  

Hardness Testing Machine

 

Rockwell Hardness Testing Machine - Mech.CS.RAS

Universal Testing Machine

Features

Mechatronic Control System Hardness Testers Models SE RAS, SE RASM, SE RAB-1, SE RAB-250, SE TWIN are manually operated. All these models are suitable for testing hardness of metals & alloys of all kinds hard or soft, whether flat, round or irregular in shape. These testers are simple in design & easy to operate, yet sensitive & accurate. Various models from the wide range are suitable for Engg. Colleges, laboratories, toolroom, inspection departments, factories etc. These testers strictly conform to IS: 3804-1988, BS: 891 parts 1&2, ASTM:E18 for Rockwell Test, IS: 2281-1983, BS: 240, ASTM:E10 for rockwell Test & IS: 5073-1988, ASTM:E18 for Rockwell Superficial Test.

MODEL : Mech.CS.RAS : Automatic load selection with automatic zero setting dial gauge. Manual Operation.

MODEL : Mech.CS.RASM : Similar to 'Mech.CS.RAS1 but motorised model. Semiautomatic operation for production testing. Drive motor single phase 230V 50 cycles.

ROCKWELL/rockwell COMBINED SYSTEM MODEL

Mech.CS. RAB-1 : Automatic load selection with automatic zero setting dial gauge. Facility for rockwell Tests with 187.5 kgf. load with 2.5 mm ball indentor, additional load 250 kgf. with 5 mm ball Indentor for testing hardness of non- ferrous metals. Manual Operation.

MODEL : Mech.CS. RAB-250 : Similar to 'Mech.CS.RAB-11 but bigger capacity Diamond Holder is guided in a set of two bail cage, which enables testing of small pins having dia. less than 6 mm (upto 3mni dia)

ROCKWELL/ROCKWELL SUPERFICIAL COMBINED SYSTEM

MODEL : Mech.CS.TWIN : Manual load selection with automatic zero setting dial gauge. Manual Operation. Diamond Holder is guided in a set of two ball cage, which enables testing of small pins having dia. less than 6 mm. (upto 3 mm dia.)

TECHNICAL DATA

MODEL UNIT Mech.CS.RAS Mech.CS.RASM Mech.CS. RAB-1 Mech.CS. RAB-250 Mech.CS.TWIN
Loads Kgf. 60,100, 60, 100, 60,100, 150, 60, 100,150, 15, 30,45, (Rockwell
    150. 150. 187.5, 250. 187.5, 250 Superficial) 60,100,150 (Rockwell)
Initial Load Kgf. 10 10 10 10 3(Rockwell Superficial) & 10 (Rockwell)
Max. Test Height mm. 230 230 230 295 295
Depth of Throat mm. 133 133 133 150 150
Max. Depth of elevating mm. 240 240 240 310 310
screw below base
Size of Base (Approx) mm. 171x423 171x423 171x423 210x470 210x470
Machine Height mm. 635 635 635 845 845
Net. Weight (Approx) Kg. 75Kg. 75 Kg. 75 Kg. 137 Kg 126 Kg.

 

SERIES RASN:

Rockwell & Rockwell superficial tests consists of forcing an indentor (Diamond or Ball) into the surface of a test piece in two steps i.e. first with preliminary test force and thereafter with additional test force & the measuring depth of indentation after removal of additional test force (Remaining preliminary test force active) for measurement or hardness value. OPERATION : For Rockwell & Rockwell Superficial

OPERATION : For Rockwell & Rockwell Superficial Test :

In case of 'RASN' series machines for Rockwell or Rockwell Superficial Test a preliminary test force in first applied & then indicator is automatically set for zero. Quickly thereafter & additional test force is applied without removing the preliminary test force. When the penetration is stabilized, the additional test force is removed & the hardness number is shown directly on the indicator.

For rockwell Test

The operation is exactly same as above. However, the diameter of impression is measured out side of machine by rockwell microscope. rockwell Hardness number is found out by referring corresponding hardness tables showing hardness number against di. of indentation for specified ball diameter and test force.

    rockwell Hardness Testing Machine - SE B3000(O)
    • Suitable for Rockwell Tests.
    • Manual operated.
    • Priliminary Test Force - 98.7N (10 kgf.)
    • Additional Test Force - 490.3, 882.6,1373N (50, 90,140 kgf.)
    • Total Test Force - 588.4, 980.7,1471N (60,100,150 kgf.)
    • Test Force selection by external dialing.
    • Auto zero setting dial gauge.

     

    Rockwell cum rockwell Tester: Model RASN (B):

    • Same as RASN above in additional
    • Additional Test Force - 1471, 2354N (177.5, 240 kgf.)
    • Total Test Force - 1839, 2452N (187.5, 250 kgf.)
    rockwell Hardness Testing Machine - SE B3000(O)
    • Suitable for Rockwell Tests.
    • Motorised for automatic operation cycle (load / dwell / unload)
    • Additional Test Force - 490.3, 882.6,1373N (50, 90,140 kgf.)
    • Total Test Force - 588.4, 980.7,1471N (60,100,150 kgf.)
    • Test Force selection by external dialing. Auto zero setting dial gauge.

     

    Mechatronic Control System’s Hardness Testers Models RAS, This models is suitable for testing hardness of metals & alloys of all kinds hard or soft, whether flat, round or irregular in shape. These testers are simple in design & easy to operate, yet sensitive & accurate. Various models from the wide range are suitable for Engg. Colleges, laboratories, tool room, inspection departments, factories etc. These testers strictly conform to IS: 3804-1988, BS: 891 parts 1&2, ASTM:E18 for Rockwell Test, IS: 2281-1983, BS: 240, ASTM:E10 for Rockwell Test & IS: 5073-1988, ASTM:E18 for Rockwell Superficial Test.

    MODEL : RAS Automatic load selection with automatic zero setting dial gauge. Manual Operation.

    Model RAS Digital

    Digital Hardness Tester for Rockwell tests. Motorized for automatic operation cycle i.e. load / dwell / unload.
    Preliminary Test Force - 98.07N (10 kgf.)
    Additional Test Force - 490.3, 882.6, 1373N (50, 90, 140 kgf.)
    Total Test Force - 588.4, 980.7, 1471N (60, 100, 150 kgf.)
    Test Force selection by external dialing.
    Set position with LED bar indicator for easy operation.
    Key board entry through reliable membrane switches for scale / GO-NOGO / dwell time selection.
    Large size scale display for easy reading with 0.1 Rockwell resolution.
    Parallel output for connecting dot matrix printer to get results indicating serial number of tests, hardness scales, hardness value and high / good / low indication

    TECHNICAL DATA

    SPECIFICATIONS UNIT RAS(O)
    Loads kgf 60, 100 & 150
    Initial Load kgf 10
    Max. Testing Height mm 230
    Depth of Throat mm 200
    Max. Depth of elevating screw below base mm 240
    Size of Base mm 171x443
    Machine Height mm 635
    Net Weight (Approx.) kg. 75
    Drive Motor HP 0.33-415v/p

    SERIES RASN:

    MODEL RAS Digital O
    Testing table 200 mm 1 pc
    Testing table V groove 70 mm 1 pc
    Ball Holder 1/16 mm 1 pc
    Test Block HRB 1 pc
    Test Block HRC 1 pc
    Allen Spanner 4 pcs
    Instruction Manual 1 book