We Do ! Conversion Retrofitting of all Testing Machines
HomeContact Us  
Mechatronic Control SystemsMechatronic Control Systems  

Impact Testing Machine


Impact Testing Machine - Mechanical - Mech.CS.IT30

Impact Testing Machine

Mechatronic Control System is one of the leading manufacturer and exporter of Impact Testing Machines. We design and build different models of impact testing machines with utmost precision, with the help of state of the art technology. Impact testing machine is used to test the resistance of metal & alloys to external impacts.


The Pendulum Impact Tester Model MCS-IT 30 is designed for conduction Izod & Charpy Test. The test methods confirm to BS:131:PART 4-1972 (Amended 15 Aug. 1993) & BSEN: 10045 - 2 : 1993.

The Pendulum is mounted on antifriction bearings. It has two starting positions, the upper one for Charpy and the lower one for Izod testing. On release, the Pendulum swing down to break the specimen and the energy absorbed in doing so is measured as the difference between the height of drop before rupture & height of raise after repture of the test specimenn and is read from the maximum pointer on the dail scale.

Charpy Test

The Charpy test piece rests on alloy steel supports anvils fitted on the base of the machine rigidly held in position by alien screws. End stopper is provided for quickly & accurately locating the test piece centrally between the supports.

Izod Test

The Izod test piece is clamped vertically in Izod support anvils, fitted on the base of the machine. The support is provided with a machined vertical groove to suit the test piece size. The front clamp piece & alien screw enable clamping of the test piece in correct height with the help of Izod setting gauge supplied.

Impact Testing Machines

Controls of Pendulum

The Pendulum supported in the starting positions is by a self resetting latch. The release mechanism is operated by lever. The Pendulum release latch is operated only when this lever is operated.

Strikers & Supporters

There are strikers & one combined support available for fitting into the Pendulum & on to the base of the machine for Izod, Charpy test. Changing from one striker to another is achieved simply by fixing the new striker into its position.

Maximum Capacity 300 J/168 J 300 J / 170 J
Minimum Scale Graduation 2J 0.5 J
Overall Size (Approx.) 1.65 m (H) 1.65 m x 0.45 mx
1.1 m x 0.45 mx 1.65 m (H)
Net Weight (Approx.) 375 Kg. 375 Kg.


Optional Accessories:

  • Caliper gauge for checking V notch for Izod & Charpy as per BS:131 :PART 1, 2, 3
  • Depth notch gauge including V & U notch, angle & radius.
  • Self centering tong.
  • V - notch milling cutter.
  • U - notch milling cutter